RECOMMENDED SPECIFICATION FOR THE PROPER APPLICATION OF VINERTAX DECORATIVE TEXTURE COAT

Two coats waterproofed sand faced cement plastered surface in 1:4 ratio as per the site requirement in line and strictly to plumb to minimize undulation, including finishing with sharp edge at corners, niches etc.
Grooves at regular intervals approximately after every 20 sq.mts. is recommended to be provided on the plastered surface.
Care should be taken to ensure that the plastered surface is not punctured / damaged while erection of scaffolding.
Application of Vineratex should be undertaken only after all other civil work i.e. plastering, polishing, painting, fitting etc. have been completed.
Application of Vineratex should be undertaken only when the plastered surface is cured and completely dry and free from SALT PETER action.
Thickness of a dry coat of Vineratex on application will range from 2.00 mm to 2.5 mm. Application of Vineratex is neither recommended nor should be undertaken during inclement weather conditions.
After Vineratex is applied it is customer's responsibility to protect the finished surface from being spoiled or damaged by other contractors working at site.
Vineratex when delivered, should be stored away from the Sun, inside a building.

SPECIFICATION AND CHEMICAL COMPOSITION
OF VINERATEX DECORATIVE TEXTURE COAT

“VINERATEX” Decorative Texture Coat is a Synthetic plaster consisting of crushed stone chips of 0.5 to 2.5 mm size in proper gradation, bonded with Synthetic Resins, Adhesives and various additives and applied to a dry film thickness of 2 of 2.5 mm approximately.

The basic Adhesive used in the manufacture of VINERATEX is an Aqueous Vinyl Acetate / Acrylate Co-Polymer Emulsion. The Acrylate component polymerized into the product, imparts goods flexibility to the coating. The Co-Polymer emulsion is combined with other Chemical Compound to give specific properties to the final coating of VINERATEX. These chemicals are designed to give fungus and bacterial resistance property while in the drum, as well as to applied Coating. They also give good application flow properties and cohesive finish, thereby enabling the adhesive to penetrate into the substrate before drying and form anchor like grip. The Additives also reinforce the “VINERATEX” coating, impart water resistance and increase the life of the coating.

The specification demands that to maintain consistent quality, the material is supplied in ready-mixed paste, packed in airtight drums. In packed drums, the shelf life of the material will be at least on year, if stored in cool dry place under cover.

SPECIFICATIONS:

Providing and applying of Resin Bonded. Ready Mixed Ready to Use Decorative Textured Coating of Natural Stone Finish “Vineratex” of approved shade and colour. Dry film of the average thickness of 2 mm of 2.5 mm on recommended plaster specification; to perfect line, level, plump including finishing with sharp edge at corners, nitches etc. all as per manufacturers recommendations and specification including all labour materials, scaffolding and surface preparation etc. Complete as specified in drawing and as directed by the Engineer-in-charge.